Volume 16, No 1, 2019
“Experimental Of Controlling Heat Losses Process On Twin-Screw Extruders With Hdpe Material Using Regression Method”
Nikunj Limbachiya
Abstract
The Twin screw extruder machining process (TSE) is a one of the plastic extrusion technology. The quality of parts produced by the TSE machining is significantly affected by various parameters used in the process. In this present research, Three different levels of screw speed, barrel temperature and die zone temperature were selected. The response parameters were tensile strength and impact strength of the High Density Polyethelene (HDPE) polymer material. Investigation of the statistical-mathematical analysis results perform by the ANOVA and Regression analysis in MINITAB software that the optimum processing conditions for the HDPE polymer material,
Pages: 277-286
Keywords: The Twin screw extruder machining process (TSE) is a one of the plastic extrusion orthogonal array, optimize process parameter signal-to-noise ratio, tensile and impact strength. Using taguchi analysis with ANOVA Method and Regression analysis.